CPC1016N各脚功能电路原理芯片引脚定义引脚图及功能IC贸易商-中国IC网-芯三七

当前位置：IC37首页_>C字母起始型号索引_>C字母起始型号索引第668页更新时间：2024-12-03 16:29:20

产品型号CPC1016N的概述

芯片CPC1016N概述 CPC1016N是一款由Bourns公司开发的电力开关和信号传输组件，广泛应用于各种电子设备中。该芯片属于光耦合器（光隔离器）的类别，能有效地在进行电力转换的同时保持信号隔离，从而为下游电路提供保护。其设计初衷是用来隔离高电压和低电压电路，保证使用者和设备的安全。CPC1016N在电气特性、热性能和抗干扰能力方面都有优秀的表现，因而被广泛应用于工业控制、家用电器和自动化设备中。芯片CPC1016N的详细参数 CPC1016N的主要参数包括： 1. 工作电压：该芯片支持的工作电压范围为低至5V至高达60V； 2. 输出电流：最大输出电流可达50mA，这使得它可以很好地承载多种负载。 3. 开关时间：响应时间大约在1毫秒左右，适合大多数快速开关应用。 4. 绝缘电压：提供高达5000Vrms的绝缘电压，保证了在高电压环境中的安全应用； 5. 封装形式： ...

产品型号CPC1016N的Datasheet PDF文件预览

Molded Ultra-Mini DYAD^™

CM5

Features

Description

Clare’s Molded Ultra-Mini DYAD^TMis well suited for small,

signal switching applications. The small size lends itself

to surface mountable applications; working well on higher

density PC boards. The Molded Ultra-Mini DYAD^TMhas

sputtered ruthenium contacts and an extraordinary seal

strength achieved by a patented laser sealing of the leads.

In low level or dry switching environments, switches

typically exceed 1 billion operations. In addition, the

molding process provides a solid plastic outer shell. This

plastic shell provides superior mechanical strength,

eliminates concerns over handling glass switches, and

provides an ideal solution for high speed, automated

assembly environments.

• Small size

• SMT-compatible

• Easily formed leads

• Sputtered ruthenium contacts

• Hermetically sealed contacts

• Fast switching speed — up to 500Hz

• Wide range of available magnetic sensitivities

• Superior mechanical strength

• Enhanced for better auto placement

Applications

• Security

− Proximity sensing

− Smoke alarms

• Automotive

Ordering Information

A complete part number is represented by the digits to

the right. For example, CM5S1030 is a MOLDED ULTRA-

MINI DYAD™ with a minimum operate value of 10NI and

a maximum of 30NI. Refer to the switch operating

specification charts for available ranges. Special ranges

are available upon request.

− Level sensor

− Lamp current sensor

• Relays

Standard Test Coil

The magnetic force (expressed in NI, AT or Ampere Turns) required to cause the reed switch contacts to

close is called the pull-in or operate value.

CM5

Surface Mount Molded Ultra-Mini DYAD

Refer to operating characteristics table for complete part number.

Part #

Coil-1

Molded Ultra-Mini DYAD™

Coil Definition

Coil Resistance

Number of Turns

Wire Size

NARM1 CTC01

1200Ω

Part #

Operate Range (NI)

5,000

0.0399mm (AWG 46)

3.96mm

CM5S1015

CM5S1020

CM5S1030

CM5S1520

CM5S1525

CM5S2025

10 to 15

10 to 20

10 to 30

15 to 20

15 to 25

20 to 25

Bobbin Diameter (inside cell)

Winding Length

10.4mm

⁽¹⁾Consult factory for test procedure.

The reed switch shall be placed in the test coil with the gap centered in the core of the coil winding.

Test leads and their clips must be non-magnetic.

The longitudinal axis of the test coil and the test switch shall be vertical.

Molded Ultra-Mini DYAD™ Surface Mount

1,2,3

Part #

Operate Range (NI)

CM5-2319

CM5-2315

CM5-2376

CM5-2325

CM5-2341

CM5-2378

10 to 15

10 to 20

10 to 30

15 to 20

15 to 25

20 to 25

¹Tolerance = 1.5NI

²Full Blade Sensitivity

³Surface Mount Switches are packaged 3,000 parts per reel

DS-CM5-R1

www.clare.com

Molded Ultra-Mini DYAD^™

CM5

Absolute Maximum Ratings are stress ratings. Stresses

in excess of these ratings can cause permanent damage

to the device. Functional operation of the device at these

or any other conditions beyond those indicated in the

operational sections of this data sheet is not implied.

Exposure of the device to the absolute maximum ratings

for extended period may degrade the device and effect

its reliability.

Absolute Maximum Ratings (@ 25˚ C)

Parameter

Min

Typ Max Units

Switching Voltage