HR25-9TJ-16P全新原装原理图各脚功能电路原理芯片引脚定义-中国IC网-芯三七

High Performance, Microminiature Circular Connectors

HR25 Series

Mated dimensions

43.8

35.8

Diagrams of Connectors in Combination

Solder type receptacle (HR25-*TR-**)

Solder type plug (HR25-*TP-**)

Crimp type receptacle (HR25-9TR-**C)

Crimp type plug (HR25-9TP-**C)

Direct PCB mounting type receptacle (HR25-*TR-**A)

Solder type jack (HR25-*TJ-**)

Crimp type jack (HR25-9TJ-**C)

Features

1. Small, high density design

Maximum plug outer diameter : 4, 6, 8 contacts : Ø10.5

12, 16, 20 contacts : Ø12.5

Designed with Hirose technology to be small, compact connectors with a low profile.

2. Wide range of product variations

Number of contacts: 4, 6, 8, 12, 16, 20

Connector styles : Plug, jack, receptacle

Termination style

Contact gender

: Solder, crimp (Additionally, a direct PCB mounting style is also available for receptacles.)

: Plug, receptacle, and jack connectors are available configured either way with male

or female contacts.

3. Shielded design

The connector’s metal shell design is an optimal choice for devices that require EMI shielding.

4. RoHS compliant

All materials and substances used to produce this product comply with RoHS standards.

In cases where the application will demand a high level of reliability, such as automotive,

please contact a company representative for further information.

1

2015.1w

HR25 Series●High Performance, Microminiature Circular Connectors

Product Speciﬁcations

Operating

temperature range

Storage temperature

range

Rated current

1A

-25ç to +85ç

-10ç to +60ç

Ratings

Rated voltage

30V AC, 42V DC

Items

Specifications

Conditions

1.Contact resistance 30 mø min.

Measured at DC 1A

Measured at DC 100 V

AC 100 V for one minute

2.Insulation

1,000 Mø min.

resistance

3.Withstanding

Voltage

No ﬂashover or dielectric breakdown.

4.Vibration

resistance

No electrical discontinuity for 10 µs or

greater.

10 to 55 Hz/cycle, amplitude: 0.75 mm, 3 axis directions,

2 hours each direction

No electrical discontinuity for 10 µs or

greater.

Acceleration: 490 ms², duration: 11 ms, 3 axis directions,

3 cycles each direction.

5.Shock resistance

6.Mating Cycles

Contact resistance: 50 mø max.

1,000 times

-55ç: 30 minutes Normal temperature: 10 to 15 minutes

➝

7.Temperature cycle Insulation resistance: 1,000 Mø min.

85ç: 30 minutes Normal temperature: 10 to

➝

15minutes, left for 5 cycles

Insulation resistance:

8.Moisture

Temperature: 40ç, relative humidity: 90 to 95%,

left for 96 hours

5 Mø min. (at high humidity)

resistance

50 Mø min (when dry)

Material

Item

Material

Finish

Remarks

――――

UL94V-0

Plated shell

Insulator

Zinc alloy

PPS resin

Nickel plated

――――

Plug/jack

Ethylene-propylene

rubber

Gasket, boot

――――

Contact

Plated shell

Insulator

Contact

Phosphor bronze

Zinc ally

Gold plated

Nickel plated

――――

UL94V-0

――――

PPS resin

Receptacle

Phosphor bronze

Gold plated

Ethylene-propylene

rubber

Gasket

――――

Product Number Structure

HR25 9 T P 20 P C (**)

-

❶

❷ ❸ ❹

❺

❻

❼

❽

❶Model name：HR25 Series

❷Shell size：The shell size is the outer diameter of the mating end of the plug.

❸Locking mechanism

T：Screw-lock

❹Connector type

P：Plug

R：Receptacle

J：Jack

❺Number of contacts

❻Contact type:

S：Female contact

P：Male contact

❼Contact termination method:

None：Solder termination

C：Crimp termination

A：PCB dip termination

❽Other specifications: A two-digit number is added to indicate other specifications than ❶ to ❼ shown above.

2

HR25 Series●High Performance, Microminiature Circular Connectors

Plug

Ａ

● Solder type

Unit: mm

Part No.

HRS No.

No. of contacts

4

A

B

C

D

Ø

Weight

Ø

HR25-7TP-4P(72)

HR25-7TP-4S(72)

HR25-7TP-6P(72)

HR25-7TP-6S(72)

HR25-7TP-8P(72)

HR25-7TP-8S(72)

HR25-9TP-12P(72)

HR25-9TP-12S(72)

HR25-9TP-16P(74)

HR25-9TP-16S(73)

HR25-9TP-20P(72)

HR25-9TP-20S(73)

125-0001-8 72

125-0002-0 72

125-0003-3 72

125-0004-6 72

125-0005-9 72

125-0006-1 72

125-0101-2 72

125-0102-5 72

125-0103-8 74

125-0104-0 73

125-0105-3 72

125-0106-6 73

6

35

10.5

6.7

5

8g

8

12

16

20

43

12.5

8.7

7

13g

● Crimp type

Unit: mm

Weight

Part No.

HRS No.

No. of contacts

12

A

B

C

D

Ø

HR25-9TP-12PC(72)

HR25-9TP-12SC(72)

HR25-9TP-16PC(72)

HR25-9TP-16SC(72)

HR25-9TP-20PC(72)

HR25-9TP-20SC(72)

125-0401-6 72

125-0402-9 72

125-0403-1 72

125-0404-4 72

125-0405-7 72

125-0406-0 72

16

20

43

12.5

8.7

7

12g

Receptacle

13.5

11.5

5.8

C

B

D(HEX)

● Solder type

Unit: mm

Weight

Part No.

HRS No.

No. of contacts

A

Ø

B

C

D

HR25-7TR-4S(73)

HR25-7TR-4P(73)

HR25-7TR-6S(73)

HR25-7TR-6P(73)

HR25-7TR-8S(73)

HR25-7TR-8P(73)

HR25-9TR-12S(71)

HR25-9TR-12P(71)

HR25-9TR-16S(71)

HR25-9TR-16P(71)

HR25-9TR-20S(71)

HR25-9TR-20P(71)

125-0007-4 73

125-0008-7 73

125-0009-0 73

125-0010-9 73

125-0011-1 73

125-0012-4 73

125-0107-9 71

125-0108-1 71

125-0109-4 71

125-0110-3 71

125-0111-6 71

125-0112-9 71

4

6

10.6

M8.5×0.5

M8×0.5

10

12

3g

4g

8

12

16

20

12.6

M10.5×0.5

M10×0.75

Ａ

● Crimp type

Unit: mm

5.8

Part No.

HRS No.

No. of contacts

12

A

11.5

13

11.5

13

11.5

13

Weight

HR25-9TR-12SC(71)

HR25-9TR-12PC(71)

HR25-9TR-16SC(71)

HR25-9TR-16PC(71)

HR25-9TR-20SC(71)

HR25-9TR-20PC(71)

125-0407-2 71

125-0408-5 71

125-0409-8 71

125-0410-7 71

125-0411-0 71

125-0412-2 71

16

20

3g

M10×0.75

12（HEX）

M10×0.5

3

HR25 Series●High Performance, Microminiature Circular Connectors

14.1

11.5

Receptacle

2（Dip length）

5.8

Ｃ

Ｂ

Ｄ（ＨＥＸ）

● Direct PCB mounting type

Unit: mm

Weight

Part No.

HRS No.

No. of contacts

4

A

B

C

D

Ø

HR25-7TR-4SA(73)

HR25-7TR-4PA(73)

HR25-7TR-6SA(73)

HR25-7TR-6PA(73)

HR25-7TR-8SA(73)

HR25-7TR-8PA(73)

HR25-9TR-12SA(71)

HR25-9TR-12PA(71)

HR25-9TR-16SA(71)

HR25-9TR-16PA(71)

HR25-9TR-20SA(71)

HR25-9TR-20PA(71)

125-0019-3 73

125-0020-2 73

125-0021-5 73

125-0022-8 73

125-0023-0 73

125-0024-3 73

125-0119-8 71

125-0120-7 71

125-0121-0 71

125-0122-2 71

125-0123-5 71

125-0124-8 71

6

10.6

12.6

M8.5×0.5

M8×0.5

10

3g

4g

8

12

16

20

M10.5×0.5

M10×0.75

12

Jack

Ｂ

D

● Solder type

Unit: mm

Weight

Part No.

HRS No.

No. of contacts

4

A

B

C

Ø

D

Ø

HR25-7TJ-4S(72)

HR25-7TJ-4P(72)

HR25-7TJ-6S(72)

HR25-7TJ-6P(72)

HR25-7TJ-8S(72)

HR25-7TJ-8P(72)

HR25-9TJ-12S(72)

HR25-9TJ-12P(72)

HR25-9TJ-16S(72)

HR25-9TJ-16P(72)

HR25-9TJ-20S(73)

HR25-9TJ-20P(72)

125-0013-7 72

125-0014-0 72

125-0015-2 72

125-0016-5 72

125-0017-8 72

125-0018-0 72

125-0113-1 72

125-0114-4 72

125-0115-7 72

125-0116-0 72

125-0117-2 73

125-0118-5 72

6

10.6

35

5

M8.5×0.5

8g

8

12

16

20

12.6

43

7

M10.5×0.5

12g

● Crimp type

Unit: mm

Weight

Part No.

HRS No.

No. of contacts

12

A

B

C

Ø

D

Ø

HR25-9TJ-12SC(72)

HR25-9TJ-12PC(72)

HR25-9TJ-16SC(72)

HR25-9TJ-16PC(72)

HR25-9TJ-20SC(72)

HR25-9TJ-20PC(72)

125-0413-5 72

125-0414-8 72

125-0415-0 72

125-0416-3 72

125-0417-6 72

125-0418-9 72

16

20

12.6

43

7

M10.5×0.5

12g

4

HR25 Series●High Performance, Microminiature Circular Connectors

Crimp-style contacts

● Male Contacts

● Female Contacts

13.4

9.4

13.4

4

9.4

4

Type

Part No.

HRS No.

Suitable Wire

Type

Part No.

HRS No. Suitable Wire

Loose

contacts

Reel

Loose

contacts

Reel

HR25-PC-111

125-0419-1

HR25-SC-111

HR25-SC-211

125-0421-3

AWG#30

125-0422-6

AWG#30

HR25-PC-211

125-0420-0

contacts

Note: 1. Please use wire with a outer jacket diameter of 0.71mm

or less.

Note: 1. Please use wire with a outer jacket diameter of 0.71mm

or less.

2. Loose contacts come in packages of 100 pcs.

Reel contacts come in reels of 10,000 pcs.

2. Loose contacts come in packages of 100 pcs.

Reel contacts come in reels of 10,000 pcs.

Applicable Tools

Applicable Wire and

Type

Item

Part No.

HRS No.

Applicable Contacts

Applicable Cable

Diameter

HR25-PC-111

HR25-SC-111

Manual Manual crimping tool

Auto crimping

machine body

Auto

HR25-TA3032HC

CM-105

150-0207-3

901-0005-4

901-2040-6

AWG#30

−

HR25-PC-211

HR25-SC-211

Applicator

AP105-HR25-1

AWG#30

Cable crimping tool

Extractor

HR10A-TC-02

HR25-TP

150-0041-2

150-0091-0

−

5

7

Ø 、Ø

−

Assembly Tools

Use of the following assembly tools will simplify the process of disassembling and assembling the connectors for the cable

assembly.

Part No.

HRS No.

Suitable Connectors and Uses

HR25-7TP-T01

HR25-9TP-T01

HR25-7TJ-T01

HR25-9TJ-T01

150-0082-0

150-0080-4

150-0089-9

150-0090-8

For HR25-7TP wiring and P shell unit tightening

For HR25-9TP wiring and P shell unit tightening

For HR25-7TJ wiring and J shell unit tightening

For HR25-9TJ wiring and J shell unit tightening

5

HR25 Series●High Performance, Microminiature Circular Connectors

Cable Assembly Procedures

The outline of wiring work for this diagram uses the soldered type as an example.

The jack side is also based on the work outline of the plug: however, the receptacle side does not require a special work

outline and has been omitted because of this.

● Construction Diagram

P shell unit

Spanner position

Clamp body

Cable

Clamp fitting

2 or less

Solder type approx. 1.5

Crimp type 1.7± ±.2

Boss

Cable bushing

Ａ

Set screw

(Opposite sides 1.27)

Table 1

Shell size

Soldered type A

dimensions

Crimp type A

dimensions

Spanner spacing

Tightening torque

7

9

10mm

19mm

−

8mm

1N

m

・

15mm

10mm

Work Operation Procedures

1. With regard to cables, the wire to be used should have a conductor with a nominal cross-sectional area of 0.08 mm²

(AWG#28) or less in a finished form suited to each size.

2. First pass the cable bushing and the plug body in order over the cable, then cut the end at the dimensions indicated in the

above diagram.

3. Mount the P shell unit in the wiring jig and perform the solder wiring.

4. Use the cable crimping jig (HR10A-TC-02) to fix the clamp fitting to the cable.

5. After performing the wiring, tighten the plug body to the screw portion of the P shell unit using the specified torque (in the

above table).

6. Tighten the set screw so that the tip of the set screw falls into one of the two bosses of the clamp fitting. Note that the

tightening torque of the set screw is from 0.3 to 0.4 Nm.

7. Put the cable bushing over the plug body and complete the work.

Note that the use of paint lock (e.g., Locktight 263 manufactured by HENKEL JAPAN LTD.) is recommended on the

screw portion to prevent loosening of the P shell unit.

The aforementioned work procedure is for the soldered type. In the case of the crimp-style type, Steps 1 and 3 are changed as

follows:

1. With regard to cables, the wire to be used should have a conductor with a nominal cross-sectional area of 0.05 mm²

(AWG#30) in a finished form suited to each size.

3. Crimp a suitable crimp terminal to the conductor portion of the cable, then fit into the housing of the P shell unit.

6

HR25 Series●High Performance, Microminiature Circular Connectors

Mounting Hole Dimensions Diagram

Mounting hole dimensions are indicated as viewed from the engagement side.

Lock System

Screw Lock Type

Shell Size

Size 7

Size 9

Diagram Symbol

A

B

1.55 ^+0.05

0

+0.03

7.25

9.25

－0.02

C

4.4 ^+0.1

5.4 ^+0.1

0

Ａ

D

8 ^+0.05

10 ^+0.05

0

Mounting Panel

Thickness

0.7

2

0.7

2

～

Note: The

mark indicates the engagement guide key position.

▽

Receptacle Dip Post Conﬁguration Dimensions

1.5

1

１

４

３

６

２

５

４

７

１

３

２

４

８

×φ0.5 ^+0.1

6

×φ0.5^+0.1

0

8

×φ0.5^+0.1

0

4

0

Size 7, 4 conductors

Size 7, 6 conductors

Size 7, 8 conductors

2.1

0.7

2.1

0.7

2.1

0.7

2.1

0.7

2.8

1.4

2.8

1.4

１

３

１

２

５

１

４

８

１２

６

４

９

１０

８

５

９

１

３

１５

１

６

１９

20×φ0.5^+0.1

1.4

2.8

0

１４

１６

２０

12×φ0.5^+0.1

0

16×φ0.5^+0.1

1.4

2.8

0

Size 9, 12 conductors

Size 9, 16 conductors

Size 9, 20 conductors

Note:

1. The above diagrams are viewed from the engagement side of the socket insert (i.e., the wiring side of the pin insert).

2. The mark of the above diagrams indicates the engagement guide key position.

▽

3. A tolerance of 0.05 is recommended for dimensions without indication.

7

HR25 Series●High Performance, Microminiature Circular Connectors

Contact Conﬁguration and Basic Speciﬁcations

Shell size

Size 7

１

３

６

８

１

２

５

３

２

５

４

７

１

３

２

４

Contact conﬁguration

４

６

Number of contacts

Withstand voltage

Current capacity

4

6

8

100V AC for 1 minute

1 A

Insulation resistance

Contact resistance

1,000 Mø or greater

30 mø

Solder pot inside

diameter

0.5 mm dia.

Shell size

Size 9

１

５

２

６

３

７

２

６

３４５

７８９１０

１

５

２

３

４

８

４

９

８

Contact conﬁguration

６

７

１１１２１３１４１５

１６１７１８１９

２０

１０１１１２１３

１４１５１６

９１０１１１２

Number of contacts

Withstand voltage

Current capacity

12

16

20

100V AC for 1 minute

1 A

Insulation resistance

Contact resistance

1,000 Mø or greater

30 mø

Solder pot inside

diameter

0.5 mm dia.

Note:

1. The above diagrams are viewed from the engagement side of the socket insert (i.e., the wiring side of the pin insert).

2. The mark of the above diagrams indicates the engagement guide key position.

▽

3. The withstand voltage indicates the test voltage value. For regular use the voltage used should be less than 30 V AC or 42 V DC.

4. The current capacity of the crimp terminals indicates the value when using wire of AWG#30.

5. The insulation resistance indicates a value when measured at 100 V DC.

Precautions

1. Switch off the power of the circuit before disconnecting or plugging-in the connectors.

2. Use connectors with socket contacts at the power side of the circuit.

3. Make sure that the coupling is in completely cocked position.

4. Cable clamping, cable rotation, and other forces may vary with the cable construction. Please make sure that your cable is

suitable for use with these connectors before usage and production.

®

2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN

+

TEL: 81-45-620-3526 Fax: 81-45-591-3726

http://www.hirose.com

http://www.hirose-connectors.com

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.

The contents of this catalog are current as of date of 1/2015. Contents are subject to change without notice for the purpose of improvements.

8

型号:	HR25-9TJ-16P(72)
是否Rohs认证：	符合
生命周期：	Active
IHS 制造商：	HIROSE ELECTRIC CO LTD
Reach Compliance Code：	unknown
ECCN代码：	EAR99
HTS代码：	8536.69.40.20
风险等级：	2.2
Is Samacsys：	N
Base Number Matches：	1

电子百科

产品导航

产品型号HR25-9TJ-16P的Datasheet PDF文件预览

HR25-9TJ-16P相关产品..

HR25-9TJ-16P相关文章

IC37:专业IC行业平台