USB3300-EZK

PRODUCT FEATURES

USB3300 Hi-Speed USB Host, DEVICE or OTG PHY with ULPI Low Pin INTERFACE

󰂄 USB-IF Hi-Speed certified to the Universal Serial Bus Specification Rev 2.0

󰂄 Interface compliant with the ULPI Specification revision 1.1 in 8-bit mode

󰂄 Industry standard UTMI+ Low Pin Interface (ULPI) Converts 54 UTMI+ signals into a standard 12 pin Link CONTROLLER interface

󰂄 54.7mA Unconfigured Current (typical) - ideal for bus powered applications

󰂄 83uA suspend current (typical) - ideal for battery powered applications

󰂄 Latch-Up performance exceeds 150 mA per EIA/JESD 78, Class II

󰂄 ESD protection levels of ±8kV HBM without external protection devices

󰂄 Integrated protection to withstand IEC61000-4-2 ESD tests (±8kV contact and ±15kV air) per 3rd party test facility 󰂄 Supports FS pre-amble for FS hubs with a LS device attached (UTMI+ Level 3)

󰂄Supports HS SOF and LS keep-alive pulse

󰂄 Includes full support for the optional On-The-Go (OTG) protocol detailed in the On-The-Go Supplement Revision 1.0a specification

󰂄 Supports the OTG Host Negotiation Protocol (HNP) and Session Request Protocol (SRP) 󰂄 Allows host to turn VBUS off to conserve battery power in OTG applications

󰂄 Supports OTG monitoring of VBUS levels with internal comparators. Includes support for an external VBUS or fault monitor.

󰂄 Low Latency Hi-Speed Receiver (43 Hi-Speed clocks Max) allows use of legacy UTMI Links with a ULPI wrapper

󰂄 Integrated Pull-up resistor on STP for interface protection allows a reliable Link/PHY start-up with slow Links (software configured for low power)

󰂄 Internal 1.8 volt regulators allow operation from a single 3.3 volt supply

󰂄 Internal short circuit protection of ID, DP and DM lines to VBUS or ground

󰂄 Integrated 24MHz Crystal Oscillator supports either crystal operation or 24MHz external clock input

󰂄Internal PLL for 480MHz Hi-Speed USB operation

󰂄Industrial Operating Temperature -40°C to +85°C

󰂄 32 pin, QFN lead-free RoHS Compliant package (5 x 5 x 0.90 mm height) Applications The USB3300 is the ideal companion to any ASIC, SoCor FPGA solution designed with a ULPI Hi-Speed USBhost, peripheral or OTG core.The USB3300 is well suited for:

󰂄Cell Phones

󰂄PDAs

󰂄MP3 Players󰂄Scanners

󰂄External Hard Drives

󰂄Digital Still and Video Cameras

󰂄Portable Media Players

󰂄Printers

原装正品深圳现货长期供应.
深圳市豪迈斯科技有限公司销售热线:0755-82519503/13713702730
传真:0755-82513598

联系人:王小姐 QQ:478711007
地址:深圳市福田区福华路151号公交大厦3楼