det-tronics火焰探测器
日期:2018-1-24产品名称: | 有毒气体检测仪DM-100 | ||
产品产地: | DM-100 | ||
产品类别: | 气体检测仪 → 有毒气体检测仪 | ||
产品信息: | |||
产品名称: | 有毒气体检测仪可测气体列表 | ||
产品产地: | 美国(Detcon) | ||
产品类别: | 气体检测仪 → 有毒气体检测仪 | ||
产品信息: | |||
产品名称: | 防爆有毒气体检测仪DM-500IS型 | ||
产品产地: | 美国(Detcon) | ||
产品类别: | 气体检测仪 → 有毒气体检测仪 | ||
产品信息: | |||
产品名称: | 防爆有毒气体检测仪DM-400IS型 | ||
产品产地: | 美国(Detcon) | ||
产品类别: | 气体检测仪 → 有毒气体检测仪 | ||
产品信息: | |||
产品名称: | 防爆有毒气体传感器DM-600IS型 | ||
产品产地: | 美国(Detcon) | ||
产品类别: | 气体检测仪 → 有毒气体检测仪 | ||
产品信息: | |||
产品名称: | 防爆有毒气体探测器DM-700型 | ||
产品产地: | 美国(Detcon) | ||
产品类别: | 气体检测仪 → 有毒气体检测仪 | ||
产品信息: | |||
Det tronics多光谱火焰探测器
型 号:
价 格: 0.00
品 牌:
产品介绍: 检测原理
三频红外
供电电源
通常24VDC,范围18-32VDC
功率
4瓦特(加热器不工作),
32VDC时17瓦特(带终端电阻及加热器工作)
继电器
容量:5A/30VDC继电器3组
火灾报警:一组常开/常闭,正常不激活,锁定/不锁定
故障报警: 常开, 正常激活, 锁定/不锁定
辅助: 一组常开/常闭,正常激活, 锁定/不锁定
电流输出
4-20MA,18-19.9VDC时回路最大电阻500Ω,20-32 VDC时回路最大电阻600Ω
其它输出
RS485
EQP可寻址(特定型号)
脉冲输出(特定型号)
HART通讯(特定型号)
温度范围
工作温度: -40℃-75℃
储存温度: -55℃-85℃
危险区域额定范围-55℃-125℃的防爆型号可选
响应特性
正戊烷: 1平方英尺火焰,检测距离64米(210英尺),响应时间10秒
甲烷: 30英寸羽状火焰火焰,检测距离30米(100英尺),响应时间2秒
甲醇:1平方英尺火焰,检测距离46米(150英尺),响应时间7秒
湿度范围
0-95%相对湿度,短时间100%冷凝湿度
防护等级
IP66/67
壳体
铸铝或不锈钢
电气接口
4个3/4NPT或4个25mm接口
保质期
5年
重量
铝2.7Kg/不锈钢4.5Kg
检测角度
水平90°, 垂直75°
认证FM认证;符合FM3260(2000) CSA, ULC, VdS, ATEX认证;Exd IIC T4-T6; TüV认证;满足SIL2要求 中国CCCF认证
Approved to FM 3260 (2000), the X5200 meets the most stringent requirements worldwide with advanced detection capabilities and immunity to extraneous sources, combined with a superior mechanical design. The mounting arrangement allows the UV and IR sensors to monitor the same hazardous 1ocation with a 90-degree cone of vision. When both sensors simultaneously detect the presence of a flame, an alarm signal is generated. The detector has Division and Zone explosion-proof ratings and is suitable for use in indoor and outdoor applications.
Automatic, manual or magnetic optical integrity testing Class A wiring per NFPA-72 3-year warranty on sensor and electronics FM, CSA, ATEX, CE, VDS, CNBOP Approvals EN54-10 Certified Output Options include: Relays, 4-20 mA, RS-485, EQP Addressable, and Pulse Output*
*When pulse output is specified, the ultraviolet infrared (UVIR) flame detector is for use in controller based systems. The pulse-output model can replace existing Det-Tronics controller based flame detection systems that generate a pulse output. Compatible controllers include: Series R7404, 7494, and R7495 Controllers.
品牌DET-TRONICS
GAS CALIBRATION KIT\DET-TRONICS\225130
点式红外可燃气体探测器\PIRECLA1D1W2\DET-TRONICS\中控系统火气
三频红外火焰探测器\X3301\DET-TRONICS\中控系统火气
MULTISPECTRUM IR FLAME DETECTOR,P/N:X3301S4N13W1,DET-TRONICS
COMBUSTIBLE GAS SENSOR,CGSS1A6V2R1X3/4.6LW.CV,P/N:006824-002,DET-TRONICS,TYPHOON TURBINE,MODEL NO:TYPHOON5.2MW