授权代理MSTAR T2方案驱动板方案 MST MSD6306PUD/PUS,MSD6306PAN/PAM/PUM
日期：2015-9-15授权代理MSTAR T2方案驱动板方案 MST MSD6306PUD/PUS,MSD6306PAN/PAM/PUM
大陆区独立运营资质
T2方案驱动板方案介绍
D0611 is a multi-purpose LCD CONTROLLER, it is suitable Southeast Asia market. it is
designed to SUPPORT FULL HD LCD panel. both of the real world can be a true
representation of picture and sound.
D0611是一款多功能的 LCD 驱动板，该产品适用于东南亚市场，能够支持全高清液晶
屏幕，并且能够真实再现现实世界的图像和声音。
MSD6306PUM use MSTAR TV processing chip MSD6306PUM，SYSTEM.html" target="_blank" title="SYSTEM">SYSTEM maturity.
MSD6306PUM采用MSTAR 电视处理芯片MSD6306PUM，系统成熟。
MSD6306PUM can support DVB-T/T2,PAL-BG,HDMI,USB,VGA,YPBPR,AV signal input,
It can also support earphone output.
MSD6306PUM支持DVB-T/T2,PAL-BG,HDMI,USB,VGA,YPBPR,AV信号输入，它也支持耳机输出。
MSD6306PUM can support multi-channel signal input, supporting 1080P HD signal.
MSD6306PUM支持多路信号输入，支持1080P高清信号。
MSD6306PUMcan support remote and keypad control, easy maneuverability
MSD6306PUM支持遥控和按键板控制，易操作性。
Note: This is the board's specifications，therefore, advising clients to read this
specification before production, for reference.
二、.Features规格参数
CHIPSET（芯片） | MSD6306PUM | |||||||
MARKET AREA（市场区域） | Southeast Asia(东南亚)etc. | |||||||
OSD language (OSD语言) | English(英语),German（德语）,Spanish(西班牙) (option)可选 | |||||||
Video Input 视频输入 | ATV | VIDEO SYSTEM（视频制式） | PAL(option) | |||||
SOUND SYSTEM（声音制式） | BG(option) | |||||||
DTV | DVB-T | BandWidth | 7, 8MHZ(option) | |||||
FFT Size | 2K，8K(option) | |||||||
Code Rate | 1/2,2/3,3/4, 5/6,7/8(option) | |||||||
Guard | 1/4,1/8,1/16,1/32(option) | |||||||
Modulation | QPSK,16QAM,64QAM (option) | |||||||
| DVB-T2 | BandWidth | 7, 8MHZ(option) | ||||||
FFT Size | 2K,8K,16K,32K(option) | |||||||
Code Rate | 1/2,3/5,2/3,4/3,4/5,5/6(option) | |||||||
Guard | 1/4,1/8,1/16,1/32,1/128(option) | |||||||
Modulation | QPSK,16QAM,64QAM 256QAM(option) | |||||||
HDMI | 480I,480P,576I,576P,720I,720P,1080I,1080P | |||||||
| PC电脑 | Format格式 | Max.1920*1080*60 | ||||||
H 行频 | 30~80KHz | |||||||
V场频 | 56~75Hz | |||||||
Interface接口 | D-SUB15 | |||||||
Audio Input 音频输入 | PC-RGB | Left and right channel input 左右声道输入 | ||||||
| AV/YPBPR | ||||||||
Amplifier Output 功放输出 | 2×8 W @ 8?（option） | |||||||
Power 电源 | Requirements Voltage需求电压 | 12V/5V/5VSTB | ||||||
Panel Power屏电压 | 5V/12V | |||||||
Backlight voltage背光电压 | 12V | |||||||
Standby Power待机功耗 | <0.3W | |||||||
Keyboard按键功能 | CH-,CH+,MENU,VOL-,VOL+, SOURCE, POWER 频道-，频道+，菜单，音量-，音量+，信号源，电源 | |||||||
Comb Filter梳状滤波器 | 3D | De-Interlace | 3D | |||||
NOISE REDUCTION降噪 | 3D | |||||||
PANEL RESOLUTIONS （屏分辨率） | Support up to 8-bit dual LVDS FULL HD panel interface (最高可支持8位双LVDS全高清屏接口) | |||||||
| | | | | | | | | |
三.Features规格参数USB Multimedia
PlaybackFormat（USB多媒体支持格式）
1.MOVIE:
| MEDIA | FILE EXTENSION | Video Codec | Audio Codec | SPEC |
| MOVIE | .MPG | Mpeg1,2 | AAC | 1920x1080@ 30P |
. MOV | MPEG2 | AAC | 1920x1080@ 30P | |
.AVI | MPEG2, MPEG4 | AAC | 1920x1080@ 30P | |
.VOB | MPEG2 | AAC | 1920x1080@ 30P | |
.TS .TP | MPEG4, H.264 | AAC | 1920x1080@ 30P | |
.MP4 | MPEG4, H.264 | AAC | 1920x1080@ 30P | |
. FLV | H.264 | AAC | 1920x1080@ 30P | |
.MKV | H.264 | AAC | 1920x1080@ 30P |
2.AUDIO:
| MEDIA | Audio Codec | File Extension | Bit Rate |
AUDIO | MPEG1 Layer2 | MP3 | 32Kbps ~ 448Kbps(Bit rate) 32KHz ~ 48KHz(Sampling rate) |
MPEG1 Layer3 | MP3 | 32Kbps ~ 320Kbps(Bit rate) 32KHz ~ 48KHz(Sampling rate) | |
WAV | WAV | 44Kbps~1411kbps (Bit rate) 11.025KHz, 22.05kHz, 44.1kHz(Sampling rate) | |
AAC | AAC | 24Kbps ~ 384Kbps(Bit rate) 8KHz ~ 48KHz(Sampling rate) |
3.PHOTO:
| MEDIA | Image | ResolutionT2&Pluto (MStar suggest) | Resolution T3/T4 (Mstar suggest) | Required DRAM size by T3/T4 (Mbytes) |
PHOTO | JPEG | 8192x8192 | 15360x8640 | 3．96 |
1024x768 | 1024x768 | 6．00 | ||
PNG | 9000x6000 | 9600x6400 | 3．66 | |
1200x768 | 1200x800 | 3．66 | ||
BMP | 9000x6000 | 9600x6400 | 3．66 |
*Realize that only when you gain the copyright of the corresponding USB
functions，can the above-mentioned USB functions be used.
（*请注意只有获得相应的USB功能版权时,才可以使用上述USB功能。）
四、Function Layout 产品外观图
3.1 Front View Of D0611（前视图）
3.2 Side Elevation of D0611(侧视图)
五、Interface Definition（接口定义）
Note: All connectors default is foot 1 ; pin definitions can be found on the PCB.
（备注：所有接插件默认方脚焊盘为1脚。引脚定义可参见PCB 上丝印。）
J101 (13Pin/2.54)：Built-in power Interface 内置电源输入接口
NO 序号 | SYMBOL 名称 | DESCRIPTION 说明 |
1 | 12V | 12V 电源 |
2 | 12V | 12V 电源 |
3 | GND | GND 地 |
4 | GND | GND 地 |
5 | GND | GND 地 |
6 | 5V | 5V 电源 |
7 | 5V | 5V 电源 |
8 | 5VSTB | Often for 5V 常供5V |
9 | STB | Power switch 电源开关控制 |
10 | 5V | 5V 电源 |
11 | 5V | 5V 电源 |
12 | GND | GND 地 |
13 | GND | GND 地 |
J102 (6pin/2.0)：Backlight Interface 背光板接口
No 序号 | SYMBOL 名称 | DESCRIPTION 说明 |
1 | GND | GND 地 |
2 | GND | GND 地 |
3 | ADJ | Backlight adjustment 亮度调节 |
4 | ON/OFF | Switch Control 开关控制 |
5 | 12V | 12V Power 12V供电 |
6 | 12V | 12V Power 12V供电 |
J301 (14pin/2.0)：Remote Interface 遥控接口
No 序号 | SYMBOL 名称 | DESCRIPTION 说明 |
1 | GND | GND 地 |
2 | IR | Remote Receiver 遥控接收 |
3 | R | Red Led 红色指示灯，共阴极 |
4 | G | Green Led 绿色指示灯，共阴极 |
5 | 5V | Power supply for remote 遥控供电 |
Note: Please use the actual key. (备注：按键顺序请以实际使用功能为准)
J302 (3pin/2.0)：Key Interface 按键接口
No 序号 | SYMBOL 名称 | DESCRIPTION 说明 |
1 | GND | GND 地 |
2 | KEY1 | AD Interface 按键接口 |
3 | KEY1 | AD Interface 按键接口 |
J401 (2X15pin/2.0)：LCD LVDS data line interface 液晶屏LVDS数据线接口
No 序号 | SYMBOL 名称 | DESCRIPTION 说明 |
1 | VCC | Power supply for panel 屏电源 |
2 | VCC | Power supply for panel 屏电源 |
3 | VCC | Power supply for panel 屏电源 |
4 | Mode | 1 Normal format, 0 JEIDA format |
5 | GND | GND 地 |
6 | GND | GND 地 |
7 | RXO0- | LVDS ODD 0-Signal LVDS 奇数对0 负端 |
8 | RXO0+ | LVDS ODD 0+Signal LVDS 奇数对0 正端 |
9 | RXO 1- | LVDS ODD 1-Signal LVDS 奇数对1 负端 |
10 | RXO 1+ | LVDS ODD 1+Signal LVDS 奇数对1 正端 |
11 | RXO 2- | LVDS ODD 2-Signal LVDS 奇数对2 负端 |
12 | RXO 2+ | LVDS ODD 2+Signal LVDS 奇数对2 正端 |
13 | GND | GND 地 |
14 | GND | GND 地 |
15 | RXO C- | LVDS ODD Clock- Signal 奇数对时钟 负端 |
16 | RXO C+ | LVDS ODD Clock + Signal 奇数对时钟 正端 |
17 | RXO 3- | LVDS ODD 3-Signal 奇数对3 负端 |
18 | RXO 3+ | LVDS ODD 3+ Signal 奇数对3 正端 |
19 | RXE 0- | LVDS EVEN 0-Signal 偶数对0 负端 |
20 | RXE 0+ | LVDS EVEN 0+Signal 偶数对0 正端 |
21 | RXE 1- | LVDS EVEN 1-Signal 偶数对1 负端 |
22 | RXE 1+ | LVDS EVEN 1+Signal 偶数对1 正端 |
23 | RXE 2- | LVDS EVEN 2-Signal 偶数对2 负端 |
24 | RXE 2+ | LVDS EVEN 2+Signal 偶数对2 正端 |
25 | GND | GND 地 |
26 | GND | GND 地 |
27 | RXEC- | LVDS EVEN Clock-Signal 偶数对时钟 负端 |
28 | RXEC+ | LVDS EVEN Clock+Signal 偶数对时钟 正端 |
29 | RXE3- | LVDS EVEN 3-Signal 偶数对3 负端 |
30 | RXE3+ | LVDS EVEN 3+Signal 偶数对3 正端 |
31 | Panel for 8 bit | Pull up 3.3V to 1.5K ohm |
32 | Panel for 8 bit | Pull down 3.3V to 1.5K ohm |
33 | Panel for 8 bit | Pull up 3.3V to 1.5K ohm |
34 | Panel for 8 bit | Pull down 3.3V to 1.5K ohm |
Note: Customers shouldn’t consider each set of positive and negative interfaces, but
directly use a common line on the market
备注：客户在使用屏线时，不用考虑每组的正、负接口，直接使用市场上的通用屏线即可。
J503 (2*8pin/2.0)：HDMI Interface HDMI接口
No 序号 | SYMBOL 名称 | DESCRIPTION 说明 |
1 | GND | GND 地 |
2 | GND | GND 地 |
3 | 2N | HDMI 2 Negative (HDMI 2负) |
4 | 2P | HDMI 2 Positive (HDMI 2正) |
5 | 1N | HDMI 1 Negative (HDMI 1负) |
6 | 1P | HDMI 1 Positive (HDMI 1正) |
7 | 0N | HDMI 0 Negative (HDMI 0负) |
8 | 0P | HDMI 0 Positive (HDMI 0正) |
9 | CLKN | HDMI CLK Negative (HDMI CLK负) |
10 | CLKP | HDMI CLK Positive (HDMI CLK正) |
11 | SCL | SCL (HDMI时钟) |
12 | NC | NC |
13 | HPD | HPD (HDMI热插拔检测) |
14 | SDA | SDA (HDMI数据) |
15 | GPIO | GPIO (控制口) |
16 | 5V | 5V (供电) |
J605 (4pin/2.0)：USB Interface USB接口
No 序号 | SYMBOL 名称 | DESCRIPTION 说明 |
1 | 5V | USB Power USB供电 |
2 | DM | Data Minus USB数据负信号 |
3 | DP | Data Positive USB数据正信号 |
4 | GND | GND 地 |
J902(4pin/2.0)：Speaker Connector 功放输出左、右声道接口
No 序号 | SYMBOL 名称 | DESCRIPTION 说明 |
1 | R+ | Audio Right Channel Output + 右声道正输出 |
2 | R- | Audio Right Channel Output - 右声道负输出 |
3 | L- | Audio Left Channel Output - 左声道负输出 |
4 | L+ | Audio Left Channel Output + 左声道正输出 |
六、 CONTROLLER DIMENSIONS(板卡结构图)UNIT(单位）:mm（毫米）
七、Key schematics (按键板原理图)
Key schematics for on main board(主板上的按键板原理图)
External press the keypad schematics (外接按键板原理图)
LED schematics for on main board (主板上的LED按键板原理图)
