LM111QML-SP

The LM111 is a voltage comparator that has input currents nearly a thousand times lower than devices such as the LM106 or LM710. It is also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. The output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, it can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.

LM111是具有比LM106或LM710等器件低一千倍的输入电流的电压比较器。它还被设计为在更宽的电源电压范围内工作：从标准±15V运算放大器电源到用于IC逻辑的单5V电源。输出与RTL、DTL和TTL以及MOS电路兼容。此外，它可以驱动灯或继电器，在高达50毫安的电流下切换到高达50V的电压。

Both the inputs and the output of the LM111 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire OR'ed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the device is also much less prone to spurious oscillations. The LM111 has the same pin configuration as the LM106 and LM710.

LM111的输入和输出都可以从系统接地隔离，并且输出可以驱动接地、正电源或负电源的负载。提供偏移平衡和选通能力，并且输出可以是有线或ED。虽然慢于LM106和LM710（200 ns响应时间与40 ns），但设备也不太容易产生寄生振荡。LM111具有与LM106和LM710相同的引脚配置。

LM111QML-SP

有辐射保证

高剂量率50 krad（Si）

Low Dose和ELDR免费100 KRAD（SI）

从单5V电源供电

输入电流：200 nA最大温度

偏置电流：20 nA最大温度

差动输入电压范围±30V

功率消耗：±15V 135毫瓦

电源电压，单5V至±15V

失调电压零能力

选通能力