DC/ DC Converter
TEN 10 Series
10 Watt
Input Specifications
Input current (no load)
12 Vin models
24 Vin models
48 Vin models
30 mA typ.
20 mA typ.
10 mA typ.
Input current (full load)
12 Vin;
3.3 Vout models:
915 mA typ.
1080 mA typ.
1045 mA typ.
435 mA typ.
530 mA typ.
510 mA typ.
215 mA typ.
260 mA typ.
250 mA typ.
12 Vin; 5 & ±5 Vout models:
12 Vin;
24 Vin;
24 Vin; 5 & ±5 Vout models:
24 Vin;
48 Vin;
other output models:
3.3 Vout models:
other output models:
3.3 Vout models:
48 Vin; 5 & ±5 Vout models:
48 Vin;
other output models:
Start-up voltage /
under voltage shut down
12 Vin models
24 Vin models
48 Vin models
8.5 VDC /
16.5 VDC / 16 VDC
32.5 VDC / 32 VDC
8
VDC
Surge voltage
(1 sec. max.)
12 Vin models
24 Vin models
48 Vin models
25 V max.
50 V max..
100 V max.
Reverse voltage protection
Conducted noise (input)
Output Specifications
Voltage set accuracy
1.0 A max.
EN 55022 level A, FCC part 15, level A
± 1 %
Regulation – Input variation Vin min. to Vin max.
± 0.3 % max.
– Load variation 10 – 90 %
– single output models
± 0.5 % max.
– dual output models balanced load
– dual output models unbalanced load
±
±
1 % max.
3 % max.
Ripple and noise (20 MHz Bandwidth)
Temperature coefficient
50 mVpk-pk max.
± 0.02 % / °C
Output current limitation
>110% of Iout max., constant current
Short circuit protection
Hiccup mode, indefinite (automatic recovery)
Capacitive load
– single output models
– dual output models
2200 µF max.
470 µF max.
General Specifications
Temperature ranges
– Operating
– Case temperature
– Storage
– 40 °C ... + 75 °C (no derating)
+ 95 °C max.
– 40 °C ... + 125 °C
Humidity (non condensing)
95 % rel H max.
>1 Mio. h @ + 25 °C
1‘500 VDC
Reliability, calculated MTBF (MIL-HDBK-217 E)
Isolation voltage
Isolation capacity
Isolation resistance
Input/ Output
Input/ Output
120 pF typ
Input/ Output (500 VDC)
> 1‘000 M Ohm
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
Page 2