欢迎访问ic37.com |
会员登录 免费注册
发布采购
所在地: 型号: 精确
  • 批量询价
  •  
  • 供应商
  • 型号
  • 数量
  • 厂商
  • 封装
  • 批号
  • 交易说明
  • 询价
更多
  • Y2933A图
  • 深圳市芯福林电子有限公司

     该会员已使用本站15年以上
  • Y2933A
  • 数量98500 
  • 厂家TI 
  • 封装TSSOP14 
  • 批号23+ 
  • 真实库存全新原装正品!代理此型号
  • QQ:2881495751QQ:2881495751 复制
  • 0755-88917743 QQ:2881495751
  • Y2933A图
  • 深圳市得捷芯城科技有限公司

     该会员已使用本站11年以上
  • Y2933A
  • 数量4750 
  • 厂家TI/德州仪器 
  • 封装NA/ 
  • 批号23+ 
  • 原装现货,当天可交货,原型号开票
  • QQ:3007977934QQ:3007977934 复制
    QQ:3007947087QQ:3007947087 复制
  • 0755-82546830 QQ:3007977934QQ:3007947087
  • Y2933A图
  • 昂富(深圳)电子科技有限公司

     该会员已使用本站4年以上
  • Y2933A
  • 数量28565 
  • 厂家TI/德州仪器 
  • 封装TSSOP14 
  • 批号23+ 
  • 一站式BOM配单,短缺料找现货,怕受骗,就找昂富电子.
  • QQ:GTY82dX7
  • 0755-23611557【陈妙华 QQ:GTY82dX7
  • Y2933A图
  • 深圳市华斯顿电子科技有限公司

     该会员已使用本站16年以上
  • Y2933A
  • 数量18027 
  • 厂家TI 
  • 封装TSSOP14 
  • 批号2023+ 
  • 绝对原装正品全新进口深圳现货
  • QQ:1002316308QQ:1002316308 复制
    QQ:515102657QQ:515102657 复制
  • 美驻深办0755-83777708“进口原装正品专供” QQ:1002316308QQ:515102657
  • Y2933A图
  • 深圳市华斯顿电子科技有限公司

     该会员已使用本站16年以上
  • Y2933A
  • 数量18027 
  • 厂家TI 
  • 封装TSSOP14 
  • 批号2023+ 
  • 绝对原装正品全新进口深圳现货
  • QQ:1002316308QQ:1002316308 复制
    QQ:515102657QQ:515102657 复制
  • 深圳分公司0755-83777708“进口原装正品专供” QQ:1002316308QQ:515102657
  • Y2933A图
  • 深圳市硅诺电子科技有限公司

     该会员已使用本站8年以上
  • Y2933A
  • 数量
  • 厂家TI 
  • 封装原厂指定分销商,有意请来电或QQ洽谈 
  • 批号17+ 
  • QQ:1091796029QQ:1091796029 复制
    QQ:916896414QQ:916896414 复制
  • 0755-82772151 QQ:1091796029QQ:916896414
  • Y2933A图
  • 深圳市亿智腾科技有限公司

     该会员已使用本站8年以上
  • Y2933A
  • 数量16680 
  • 厂家TI 
  • 封装TSSOP14 
  • 批号16+ 
  • 假一赔十★全新原装现货★★特价供应★工厂客户可放款
  • QQ:799387964QQ:799387964 复制
    QQ:2777237833QQ:2777237833 复制
  • 0755-82566711 QQ:799387964QQ:2777237833
  • Y2933A图
  • 深圳市捷立辉科技有限公司

     该会员已使用本站10年以上
  • Y2933A
  • 数量69896 
  • 厂家TI/德州仪器 
  • 封装TSSOP14 
  • 批号21+ 
  • 绝对原装现货,公司真实库存
  • QQ:1803576909QQ:1803576909 复制
  • -0755-82792948 QQ:1803576909
  • Y2933A图
  • 深圳市一线半导体有限公司

     该会员已使用本站16年以上
  • Y2933A
  • 数量15000 
  • 厂家原厂品牌 
  • 封装原厂外观 
  • 批号 
  • 全新原装部分现货其他订货
  • QQ:2881493920QQ:2881493920 复制
    QQ:2881493921QQ:2881493921 复制
  • 0755-88608801多线 QQ:2881493920QQ:2881493921
  • Y2933A图
  • 深圳市科雨电子有限公司

     该会员已使用本站9年以上
  • Y2933A
  • 数量9800 
  • 厂家TI 
  • 封装TSSOP14 
  • 批号24+ 
  • 原厂渠道,全新原装现货,欢迎查询!
  • QQ:97877805QQ:97877805 复制
  • 171-4729-0036(微信同号) QQ:97877805

产品型号Y2B32021026的Datasheet PDF文件预览

Film Capacitors  
EMI Suppression Capacitors (MKP)  
Series/Type:  
B32021 ... B32026  
Date:  
May 2009  
© EPCOS AG 2009. Reproduction, publication and dissemination of this publication, enclosures hereto and the  
information contained therein without EPCOS' prior express consent is prohibited.  
EMI suppression capacitors (MKP)  
Y2 / 300 V AC  
B32021 ... B32026  
Typical applications  
Dimensional drawing  
Y2 class for interference suppression  
"Line to ground" applications.  
Climatic  
Max. operating temperature: 110 °C  
Climatic category (IEC 60068-1):  
40/110/56  
Construction  
Dielectric: polypropylene (MKP)  
Plastic case (UL 94 V-0)  
Epoxy resin sealing (UL 94 V-0)  
Dimensions in mm  
Features  
Very small dimensions  
Good self-healing properties  
High voltage capability  
Lead spacing Lead  
Type  
±0.4  
diameter  
d1  
Terminals  
10  
0.6  
0.8  
1.0  
B32021  
Parallel wire leads, lead-free tinned  
Standard lead lengths: 6 1 mm  
Special lead lengths available on request  
15 ... 27.5  
37.5  
B32022 ... B32024  
B32026  
Marking  
Marking example  
Manufacturer's logo, lot number,  
date code, rated capacitance (coded),  
capacitance tolerance (code letter),  
rated AC voltage (IEC),  
series number, sub-class (Y2),  
dielectric code (MKP), climatic category,  
passive flammability category, approvals.  
Delivery mode  
Bulk (untaped)  
Taped (Ammo pack or reel)  
For taping details, refer to chapter  
"Taping and packing"  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 2 of 18  
B32021 ... B32026  
Y2 / 300 V AC  
Approvals  
Approval marks  
Standards  
Certificate  
40018909  
EN 60384-14 / IEC 60384-14 (300 V AC)  
UL1414 (250 V AC), UL1283 (400 V AC)  
E97863, E301966  
1)  
CSA C22.2 No. 1 (250 V AC)  
CSA C22.2 No. 8 (400 V AC)  
E97863  
E301966  
1) approved by UL  
Overview of available types  
Lead spacing 10 mm  
15 mm  
22.5 mm  
B32023  
27.5 mm  
B32024  
37.5 mm  
B32026  
Type  
B32021  
B32022  
CR (µF)  
0.0010  
0.0015  
0.0022  
0.0033  
0.0047  
0.0056  
0.0068  
0.0082  
0.010  
0.015  
0.022  
0.033  
0.047  
0.056  
0.068  
0.082  
0.10  
0.15  
0.22  
0.33  
0.39  
0.47  
0.56  
0.68  
0.82  
1.0  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 3 of 18  
B32021 ... B32026  
Y2 / 300 V AC  
Ordering codes and packing units  
Lead spacing CR  
Max. dimensions Ordering code  
Ammo  
pack  
Reel  
Untaped  
w × h × l  
mm  
(composition see  
below)  
mm  
10  
µF  
pcs./MOQ pcs./MOQ pcs./MOQ  
0.0010 4.0 × 9.0 × 13.0 B32021A3102+*** 4000  
0.0015 4.0 × 9.0 × 13.0 B32021A3152+*** 4000  
0.0022 4.0 × 9.0 × 13.0 B32021A3222+*** 4000  
0.0033 4.0 × 9.0 × 13.0 B32021A3332+*** 4000  
0.0047 5.0 × 11.0 × 13.0 B32021A3472+*** 3320  
0.0056 5.0 × 11.0 × 13.0 B32021A3562+*** 3320  
0.0068 5.0 × 11.0 × 13.0 B32021A3682+*** 3320  
0.0082 6.0 × 12.0 × 13.0 B32021A3822+*** 2720  
6800  
6800  
6800  
6800  
5200  
5200  
5200  
4400  
4400  
5200  
4400  
4400  
3600  
3000  
2800  
2800  
2800  
2800  
2200  
4000  
4000  
4000  
4000  
4000  
4000  
4000  
4000  
4000  
4000  
4000  
4000  
4000  
2000  
2000  
2000  
2000  
2000  
1200  
0.010  
0.010  
0.015  
0.022  
0.022  
0.033  
0.047  
0.047  
0.056  
0.068  
6.0 × 12.0 × 13.0 B32021A3103M*** 2720  
5.0 × 10.5 × 18.0 B32022A3103+*** 4680  
6.0 × 11.0 × 18.0 B32022A3153+*** 3840  
6.0 × 12.0 × 18.0 B32022A3223M*** 3840  
7.0 × 12.5 × 18.0 B32022B3223+*** 3320  
8.0 × 14.0 × 18.0 B32022A3333+*** 2920  
8.5 × 14.5 × 18.0 B32022A3473M*** 2720  
9.0 × 17.5 × 18.0 B32022B3473+*** 2560  
9.0 × 17.5 × 18.0 B32022A3563+*** 2560  
9.0 × 17.5 × 18.0 B32022A3683M*** 2560  
15  
0.082 11.0 × 18.5 × 18.0 B32022A3823M***  
MOQ = Minimum Order Quantity, consisting of 4 packing units.  
Further intermediate capacitance values on request.  
Composition of ordering code  
+ = Capacitance tolerance code:  
*** = Packaging code:  
M = ±20%  
K = ±10%  
289 = Ammo pack  
189 = Reel  
000 = Untaped (lead length 6 1 mm)  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 4 of 18  
B32021 ... B32026  
Y2 / 300 V AC  
Ordering codes and packing units  
Lead spacing CR Max. dimensions Ordering code  
Ammo  
pack  
Reel  
Untaped  
w × h × l  
mm  
(composition see  
below)  
mm  
µF  
pcs./MOQ pcs./MOQ pcs./MOQ  
22.5  
0.047  
0.056  
0.068  
0.068  
0.082  
0.10  
0.10  
0.15  
0.15  
0.22  
0.22  
0.33  
0.39  
0.15  
0.22  
0.22  
0.33  
0.33  
0.47  
0.47  
0.47  
0.56  
0.68  
0.68  
0.68  
0.82  
1.0  
6.0 × 15.0 × 26.5 B32023A3473+*** 2720  
6.0 × 15.0 × 26.5 B32023A3563M*** 2720  
7.0 × 16.0 × 26.5 B32023A3683+*** 2320  
7.5 × 14.5 × 26.5 B32023B3683M*** 2200  
8.5 × 16.5 × 26.5 B32023A3823+*** 1920  
8.5 × 16.5 × 26.5 B32023A3104M*** 1920  
10.5 × 16.5 × 26.5 B32023B3104+*** 1560  
10.5 × 18.5 × 26.5 B32023A3154M*** 1560  
2800  
2800  
2400  
2000  
2000  
2000  
1600  
1600  
2880  
2880  
2520  
2280  
2040  
2040  
2160  
2160  
2160  
1800  
2160  
2160  
2160  
1280  
1280  
1280  
1040  
1040  
960  
880  
800  
880  
800  
720  
720  
640  
640  
10.5 × 20.5 × 26.5 B32023B3154+***  
12.0 × 22.0 × 26.5 B32023A3224M***  
14.5 × 29.5 × 26.5 B32023B3224+***  
14.5 × 29.5 × 26.5 B32023A3334+***  
14.5 × 29.5 × 26.5 B32023A3394M***  
11.0 × 19.0 × 31.5 B32024A3154+***  
11.0 × 19.0 × 31.5 B32024A3224M***  
11.0 × 21.0 × 31.5 B32024B3224+***  
13.5 × 23.0 × 31.5 B32024A3334M***  
14.0 × 24.5 × 31.5 B32024B3334+***  
15.0 × 24.5 × 31.5 B32024A3474M***  
16.0 × 32.0 × 31.5 B32024C3474+***  
18.0 × 27.5 × 31.5 B32024B3474+***  
16.0 × 32.0 × 31.5 B32024A3564+***  
18.0 × 33.0 × 31.5 B32024B3684+***  
19.0 × 30.0 × 31.5 B32024A3684M***  
21.0 × 31.0 × 31.5 B32024C3684+***  
22.0 × 36.5 × 31.5 B32024A3824+***  
22.0 × 36.5 × 31.5 B32024A3105M***  
27.5  
1400  
1400  
1400  
1000  
MOQ = Minimum Order Quantity, consisting of 4 packing units.  
Further intermediate capacitance values on request.  
Composition of ordering code  
+ = Capacitance tolerance code:  
*** = Packaging code:  
M = ±20%  
K = ±10%  
289 = Ammo pack  
189 = Reel  
000 = Untaped (lead length 6 1 mm)  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 5 of 18  
B32021 ... B32026  
Y2 / 300 V AC  
Ordering codes and packing units  
Lead spacing CR  
Max. dimensions Ordering code  
Ammo  
pack  
Reel  
Untaped  
w × h × l  
(composition see  
below)  
mm  
µF  
mm  
pcs./MOQ pcs./MOQ pcs./MOQ  
37.5  
0.33  
0.47  
0.56  
0.56  
0.68  
0.82  
0.82  
1.0  
12.0 × 22.0 × 41.5 B32026A3334+***  
14.0 × 25.0 × 41.5 B32026A3474+***  
14.0 × 25.0 × 41.5 B32026A3564M***  
16.0 × 28.5 × 41.5 B32026B3564+***  
16.0 × 28.5 × 41.5 B32026A3684+***  
16.0 × 28.5 × 41.5 B32026A3824M***  
18.0 × 32.5 × 41.5 B32026B3824+***  
18.0 × 32.5 × 41.5 B32026A3105M***  
20.0 × 39.5 × 41.5 B32026B3105+***  
1620  
1380  
1380  
800  
800  
800  
720  
720  
640  
1.0  
MOQ = Minimum Order Quantity, consisting of 4 packing units.  
Further intermediate capacitance values on request.  
Composition of ordering code  
+ = Capacitance tolerance code:  
*** = Packaging code:  
M = ±20%  
K = ±10%  
289 = Ammo pack  
189 = Reel  
000 = Untaped (lead length 6 1 mm)  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 6 of 18  
B32021 ... B32026  
Y2 / 300 V AC  
Technical data  
Rated AC voltage ( IEC 60384-14 )  
Maximum continuous DC voltage VDC  
Maximum continuous AC voltage VAC  
Max. operating temperature Top,max  
DC test voltage  
300 V (50/60 Hz)  
1500 V  
480 V (50/60 Hz)  
+110 °C  
4000 V (C 0.33 µF), 3700 V (C > 0.33 µF), 2 s  
R 0.33 µF CR > 0.33 µF  
Dissipation factor tan δ (in 10-3)  
C
at 20 °C (upper limit values)  
at  
1 kHz  
1
1
CR > 0.33 µF  
30 000 s  
Insulation resistance Rins  
or time constant τ = CR Rins  
at 100 V DC, 20 °C,  
CR 0.33 µF  
100 000 MΩ  
rel. humidity 65% and for 60 s  
(minimum as-delivered values)  
Passive flammability category  
to IEC 40 (CO) 752  
B
Capacitance tolerances  
(measured at 1 kHz)  
±10% (K), ±20% (M)  
Pulse handling capability  
"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal  
voltages, expressed in V/µs.  
"k0" represents the maximum permissible pulse characteristic of the waveform applied to the  
capacitor, expressed in V2/µs.  
Note:  
The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the  
capacitor.  
dV/dt and k0 values  
Lead spacing  
dV/dt in V/µs  
k0 in V2/µs  
10 mm  
800  
677 000  
15 mm  
600  
508 000  
22.5 mm  
500  
423 000  
27.5 mm  
400  
338 000  
37.5 mm  
300  
254 000  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 7 of 18  
B32021 ... B32026  
Y2 / 300 V AC  
Mounting guidelines  
1
Soldering  
Solderability of leads  
1.1  
The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1.  
Before a solderability test is carried out, terminals are subjected to accelerated ageing (to  
IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far  
higher than the upper category temperature of the capacitors, the terminal wires should be cut off  
from the capacitor before the ageing procedure to prevent the solderability being impaired by the  
products of any capacitor decomposition that might occur.  
Solder bath temperature  
Soldering time  
235 ±5 °C  
2.0 ±0.5 s  
Immersion depth  
Evaluation criteria:  
Visual inspection  
2.0 +0/0.5 mm from capacitor body or seating plane  
Wetting of wire surface by new solder 90%, free-flowing solder  
1.2  
Resistance to soldering heat  
Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A.  
Conditions:  
Series  
Solder bath temperature Soldering time  
MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C  
coated  
10 ±1 s  
uncoated (lead spacing > 10 mm)  
MFP  
MKP (lead spacing > 7.5 mm)  
MKT boxed (case 2.5 × 6.5 × 7.2 mm)  
5 ±1 s  
(lead spacing 7.5 mm)  
uncoated (lead spacing 10 mm)  
insulated (B32559)  
MKP  
MKT  
< 4 s  
recommended soldering  
profile for MKT uncoated  
(lead spacing 10 mm) and  
insulated (B32559)  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 8 of 18  
B32021 ... B32026  
Y2 / 300 V AC  
Immersion depth  
Shield  
2.0 +0/0.5 mm from capacitor body or seating plane  
Heat-absorbing board, (1.5 ±0.5) mm thick, between capacitor  
body and liquid solder  
Evaluation criteria:  
Visual inspection  
No visible damage  
2% for MKT/MKP/MFP  
5% for EMI suppression capacitors  
As specified in sectional specification  
C/C0  
tan δ  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 9 of 18  
B32021 ... B32026  
Y2 / 300 V AC  
1.3  
General notes on soldering  
Permissible heat exposure loads on film capacitors are primarily characterized by the upper cate-  
gory temperature Tmax. Long exposure to temperatures above this type-related temperature limit  
can lead to changes in the plastic dielectric and thus change irreversibly a capacitor's electrical  
characteristics. For short exposures (as in practical soldering processes) the heat load (and thus  
the possible effects on a capacitor) will also depend on other factors like:  
Pre-heating temperature and time  
Forced cooling immediately after soldering  
Terminal characteristics:  
diameter, length, thermal resistance, special configurations (e.g. crimping)  
Height of capacitor above solder bath  
Shadowing by neighboring components  
Additional heating due to heat dissipation by neighboring components  
Use of solder-resist coatings  
The overheating associated with some of these factors can usually be reduced by suitable coun-  
termeasures. For example, if a pre-heating step cannot be avoided, an additional or reinforced  
cooling process may possibly have to be included.  
EPCOS recommends the following conditions:  
Pre-heating with a maximum temperature of 110 °C  
Temperature inside the capacitor should not exceed the following limits:  
MKP/MFP 110 °C  
MKT 160 °C  
When SMD components are used together with leaded ones, the leaded film capacitors should  
not pass into the SMD adhesive curing oven. The leaded components should be assembled af-  
ter the SMD curing step.  
Leaded film capacitors are not suitable for reflow soldering.  
Uncoated capacitors  
For uncoated MKT capacitors with lead spacings 10 mm (B32560/B32561) the following mea-  
sures are recommended:  
pre-heating to not more than 110 °C in the preheater phase  
rapid cooling after soldering  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 10 of 18  
B32021 ... B32026  
Y2 / 300 V AC  
2
Cleaning  
To determine whether the following solvents, often used to remove flux residues and other sub-  
stances, are suitable for the capacitors described, refer to the table below:  
Type  
Ethanol,  
isopropanol,  
n-propanol  
n-propanol-water  
mixtures,  
water with surface  
tension-reducing  
tensides (neutral)  
Solvent from  
table A (see  
next page)  
Solvent from  
table B (see  
next page)  
MKT  
(uncoated)  
Suitable  
Unsuitable  
In part suitable Unsuitable  
Suitable  
MKT, MKP, MFP  
(coated/boxed)  
Suitable  
Even when suitable solvents are used, a reversible change of the electrical characteristics may  
occur in uncoated capacitors immediately after they are washed. Thus it is always recommended  
to dry the components (e.g. 4 h at 70 °C) before they are subjected to subsequent electrical test-  
ing.  
Table A  
Manufacturers' designations for trifluoro-trichloro-ethane-based cleaning solvents (selection)  
Trifluoro-trichloro-  
ethane  
Mixtures of trifluoro-trichloro-ethane with ethanol and  
isopropanol  
Manufacturer  
Freon TF  
Freon TE 35; Freon TP 35; Freon TES  
Frigen 113 TR-E; Frigen 113 TR-P; Frigen TR-E 35  
Arklone A; Arklone L; Arklone K  
Du Pont  
Hoechst  
ICI  
Frigen 113 TR  
Arklone P  
Kaltron 113 MDR  
Flugene 113  
Kaltron 113 MDA; Kaltron 113 MDI; Kaltron 113 MDI 35 Kali-Chemie  
Flugene 113 E; Flugene 113 IPA Rhone-Progil  
Table B (worldwide banned substances)  
Manufacturers' designations for unsuitable cleaning solvents (selection)  
Mixtures of chlorinated hydrocarbons and ketones with fluorated hydrocarbons Manufacturer  
Freon TMC; Freon TA; Freon TC  
Arklone E  
Du Pont  
ICI  
Kaltron 113 MDD; Kaltron 113 MDK  
Flugene 113 CM  
Kali-Chemie  
Rhone-Progil  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 11 of 18  
B32021 ... B32026  
Y2 / 300 V AC  
3
Embedding of capacitors in finished assemblies  
In many applications, finished circuit assemblies are embedded in plastic resins. In this case,  
both chemical and thermal influences of the embedding ("potting") and curing processes must be  
taken into account.  
Our experience has shown that the following potting materials can be recommended: non-flexible  
epoxy resins with acid-anhydride hardeners; chemically inert, non-conducting fillers; maximum  
curing temperature of 100 °C.  
Caution:  
Consult us first if you wish to embed uncoated types!  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 12 of 18  
B32021 ... B32026  
Y2 / 300 V AC  
Cautions and warnings  
Do not exceed the upper category temperature (UCT).  
Do not apply any mechanical stress to the capacitor terminals.  
Avoid any compressive, tensile or flexural stress.  
Do not move the capacitor after it has been soldered to the PC board.  
Do not pick up the PC board by the soldered capacitor.  
Do not place the capacitor on a PC board whose PTH hole spacing differs from the specified  
lead spacing.  
Do not exceed the specified time or temperature limits during soldering.  
Avoid external energy inputs, such as fire or electricity.  
Avoid overload of the capacitors.  
The table below summarizes the safety instructions that must always be observed. A detailed de-  
scription can be found in the relevant sections of the chapters "General technical information" and  
"Mounting guidelines".  
Topic  
Safety information  
Reference chapter  
"General technical  
information"  
Storage conditions Make sure that capacitors are stored within the  
4.5  
specified range of time, temperature and humidity "Storage conditions"  
conditions.  
Flammability  
Avoid external energy, such as fire or electricity  
(passive flammability), avoid overload of the  
capacitors (active flammability) and consider the  
flammability of materials.  
5.3  
"Flammability"  
Resistance to  
vibration  
Do not exceed the tested ability to withstand  
vibration. The capacitors are tested to  
IEC 60068-2-6.  
5.2  
"Resistance to vibration"  
EPCOS offers film capacitors specially designed  
for operation under more severe vibration regimes  
such as those found in automotive applications.  
Consult our catalog "Film Capacitors for  
Automotive Electronics".  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 13 of 18  
B32021 ... B32026  
Y2 / 300 V AC  
Topic  
Safety information  
Reference chapter  
"Mounting guidelines"  
Soldering  
Cleaning  
Do not exceed the specified time or temperature 1 "Soldering"  
limits during soldering.  
Use only suitable solvents for cleaning capacitors. 2 "Cleaning"  
Embedding of  
capacitors in  
When embedding finished circuit assemblies in  
plastic resins, chemical and thermal influences  
3 "Embedding of  
capacitors in finished  
assemblies"  
finished assemblies must be taken into account.  
Caution: Consult us first, if you also wish to  
embed other uncoated component types!  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 14 of 18  
B32021 ... B32026  
Y2 / 300 V AC  
Symbols and terms  
Symbol  
α
English  
German  
Wärmeübergangszahl  
Heat transfer coefficient  
αC  
Temperature coefficient of capacitance Temperaturkoeffizient der Kapazität  
A
Capacitor surface area  
Kondensatoroberfläche  
Feuchtekoeffizient der Kapazität  
Kapazität  
βC  
Humidity coefficient of capacitance  
Capacitance  
C
CR  
Rated capacitance  
Nennkapazität  
C  
C/C  
Absolute capacitance change  
Relative capacitance change (relative  
deviation of actual value)  
Absolute Kapazitätsänderung  
Relative Kapazitätsänderung (relative  
Abweichung vom Ist-Wert)  
C/CR  
Capacitance tolerance (relative deviation Kapazitätstoleranz (relative Abweichung  
from rated capacitance)  
Time differential  
vom Nennwert)  
dt  
Differentielle Zeit  
t  
Time interval  
Zeitintervall  
T  
Absolute temperature change  
(self-heating)  
Absolute Temperaturänderung  
(Selbsterwärmung)  
tan δ  
V  
Absolute change of dissipation factor  
Absolute voltage change  
Absolute Änderung des Verlustfaktors  
Absolute Spannungsänderung  
dV/dt  
Time differential of voltage function (rate Differentielle Spannungsänderung  
of voltage rise)  
(Spannungsflankensteilheit)  
Spannungsänderung pro Zeitintervall  
Aktivierungsenergie zur Diffusion  
Eigeninduktivität  
V/t  
E
Voltage change per time interval  
Activation energy for diffusion  
Self-inductance  
ESL  
ESR  
f
Equivalent series resistance  
Frequency  
Ersatz-Serienwiderstand  
Frequenz  
f1  
Frequency limit for reducing permissible Grenzfrequenz für thermisch bedingte  
AC voltage due to thermal limits  
Reduzierung der zulässigen  
Wechselspannung  
f2  
Frequency limit for reducing permissible Grenzfrequenz für strombedingte  
AC voltage due to current limit  
Reduzierung der zulässigen  
Wechselspannung  
fr  
Resonant frequency  
Resonanzfrequenz  
FD  
Thermal acceleration factor for diffusion Therm. Beschleunigungsfaktor zur  
Diffusion  
FT  
i
Derating factor  
Deratingfaktor  
Current (peak)  
Stromspitze  
IC  
Category current (max. continuous  
current)  
Kategoriestrom (max. Dauerstrom)  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 15 of 18  
B32021 ... B32026  
Y2 / 300 V AC  
Symbol  
IRMS  
English  
German  
(Sinusoidal) alternating current,  
root-mean-square value  
Capacitance drift  
(Sinusförmiger) Wechselstrom  
iz  
Inkonstanz der Kapazität  
Impulskennwert  
k0  
LS  
λ
Pulse characteristic  
Series inductance  
Serieninduktivität  
Failure rate  
Ausfallrate  
λ0  
Constant failure rate during useful  
service life  
Konstante Ausfallrate in der  
Nutzungsphase  
λtest  
Pdiss  
Pgen  
Q
Failure rate, determined by tests  
Dissipated power  
Experimentell ermittelte Ausfallrate  
Abgegebene Verlustleistung  
Erzeugte Verlustleistung  
Wärmeenergie  
Generated power  
Heat energy  
ρ
Density of water vapor in air  
Universal molar constant for gases  
Ohmic resistance of discharge circuit  
Dichte von Wasserdampf in Luft  
Allg. Molarkonstante für Gas  
Ohmscher Widerstand des  
Entladekreises  
R
R
Ri  
Internal resistance  
Insulation resistance  
Parallel resistance  
Series resistance  
severity (humidity test)  
Time  
Innenwiderstand  
Rins  
RP  
RS  
S
Isolationswiderstand  
Parallelwiderstand  
Serienwiderstand  
Schärfegrad (Feuchtetest)  
Zeit  
t
T
Temperature  
Temperatur  
τ
Time constant  
Zeitkonstante  
tan δ  
tan δD  
Dissipation factor  
Dielectric component of dissipation  
factor  
Verlustfaktor  
Dielektrischer Anteil des Verlustfaktors  
tan δP  
tan δS  
TA  
Parallel component of dissipation factor Parallelanteil des Verlfustfaktors  
Series component of dissipation factor  
Ambient temperature  
Serienanteil des Verlustfaktors  
Umgebungstemperatur  
Tmax  
Tmin  
Upper category temperature  
Lower category temperature  
Obere Kategorietemperatur  
Untere Kategorietemperatur  
tOL  
Operating life at operating temperature Betriebszeit bei Betriebstemperatur und  
and voltage  
-spannung  
Top  
TR  
Operating temperature  
Rated temperature  
Reference temperature  
Reference service life  
AC voltage  
Beriebstemperatur  
Nenntemperatur  
Referenztemperatur  
Referenz-Lebensdauer  
Wechselspannung  
Tref  
tSL  
VAC  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 16 of 18  
B32021 ... B32026  
Y2 / 300 V AC  
Symbol  
VC  
English  
German  
Category voltage  
Category AC voltage  
Kategoriespannung  
(Sinusförmige)  
VC,RMS  
Kategorie-Wechselspannung  
Teilentlade-Einsatzspannung  
Ladespannung  
VCD  
Vch  
VDC  
VFB  
Vi  
Corona-discharge onset voltage  
Charging voltage  
DC voltage  
Gleichspannung  
Fly-back capacitor voltage  
Input voltage  
Spannung (Flyback)  
Eingangsspannung  
Ausgangssspannung  
Betriebsspannung  
Vo  
Output voltage  
Vop  
Vp  
Operating voltage  
Peak pulse voltage  
Peak-to-peak voltage Impedance  
Rated voltage  
Impuls-Spitzenspannung  
Spannungshub  
Vpp  
VR  
Nennspannung  
Amplitude of rated AC voltage  
Amplitude der Nenn-Wechselspannung  
R
VRMS  
(Sinusoidal) alternating voltage,  
root-mean-square value  
S-correction voltage  
(Sinusförmige) Wechselspannung  
VSC  
Vsn  
Spannung bei Anwendung "S-correction"  
Spannung bei Anwendung  
"Beschaltung"  
Snubber capacitor voltage  
Z
Impedance  
Scheinwiderstand  
Lead spacing  
Rastermaß  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 17 of 18  
Important notes  
The following applies to all products named in this publication:  
1. Some parts of this publication contain statements about the suitability of our products for  
certain areas of application. These statements are based on our knowledge of typical re-  
quirements that are often placed on our products in the areas of application concerned. We  
nevertheless expressly point out that such statements cannot be regarded as binding  
statements about the suitability of our products for a particular customer application.  
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar  
with them than the customers themselves. For these reasons, it is always ultimately incum-  
bent on the customer to check and decide whether an EPCOS product with the properties de-  
scribed in the product specification is suitable for use in a particular customer application.  
2. We also point out that in individual cases, a malfunction of electronic components or  
failure before the end of their usual service life cannot be completely ruled out in the  
current state of the art, even if they are operated as specified. In customer applications  
requiring a very high level of operational safety and especially in customer applications in  
which the malfunction or failure of an electronic component could endanger human life or  
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by  
means of suitable design of the customer application or other action taken by the customer  
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by  
third parties in the event of malfunction or failure of an electronic component.  
3. The warnings, cautions and product-specific notes must be observed.  
4. In order to satisfy certain technical requirements, some of the products described in this  
publication may contain substances subject to restrictions in certain jurisdictions (e.g.  
because they are classed as hazardous). Useful information on this will be found in our Ma-  
terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de-  
tailed questions, please contact our sales offices.  
5. We constantly strive to improve our products. Consequently, the products described in this  
publication may change from time to time. The same is true of the corresponding product  
specifications. Please check therefore to what extent product descriptions and specifications  
contained in this publication are still applicable before or when you place an order. We also  
reserve the right to discontinue production and delivery of products. Consequently, we  
cannot guarantee that all products named in this publication will always be available. The  
aforementioned does not apply in the case of individual agreements deviating from the fore-  
going for customer-specific products.  
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-  
sion of the "General Terms of Delivery for Products and Services in the Electrical In-  
dustry" published by the German Electrical and Electronics Industry Association  
(ZVEI).  
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP,  
MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, SIFERRIT,  
SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse,  
WindCap are trademarks registered or pending in Europe and in other countries. Further  
information will be found on the Internet at www.epcos.com/trademarks.  
Page 18 of 18  
配单直通车
Y30-12S12-5产品参数
型号:Y30-12S12-5
生命周期:Contact Manufacturer
IHS 制造商:POLYTRON DEVICES INC
Reach Compliance Code:compliant
风险等级:5.6
Base Number Matches:1
  •  
  • 供货商
  • 型号 *
  • 数量*
  • 厂商
  • 封装
  • 批号
  • 交易说明
  • 询价
批量询价选中的记录已选中0条,每次最多15条。
 复制成功!