SM5964B
8-Bit Micro-controller
64KB with ISP Flash
& 1KB RAM embedded
4.3
Program Status Word
Mnemonic: PSW
7
6
CY
AC
CY: Carry flag.
AC: Auxiliary Carry flag for BCD operations.
F0: General purpose Flag 0 available for user.
RS[1:0]: Register bank select, used to select working register bank.
RS[1:0]
Bank Selected
Location
00
Bank 0
00h – 07h
01
Bank 1
08h – 0Fh
10
Bank 2
10h – 17h
11
Bank 3
18h – 1Fh
OV: Overflow flag.
F1: General purpose Flag 1 available for user.
P: Parity flag, affected by hardware to indicate odd/even number of “one” bits in the
Accumulator, i.e. even parity.
4.4
Stack Pointer
Address: D0h
0
Reset
P
00h
5
F0
4
RS [1:0]
3
2
OV
1
F1
The stack pointer is a 1-byte register initialized to 07h after reset. This register is incremented before PUSH and
CALL instructions, causing the stack to start from location 08h.
Mnemonic: SP
7
6
Address: 81h
0
Reset
07h
5
4
SP [7:0]
3
2
1
SP[7:0]: The Stack Pointer stores the scratchpad RAM address where the stack begins. In other
words, it always points to the top of the stack.
4.5
Data Pointer
The data pointer (DPTR) is 2-bytes wide. The lower part is DPL, and the highest is DPH. It can be loaded as a 2-
byte register (e.g. MOV DPTR, #data16) or as two separate registers (e.g. MOV DPL,#data8). It is generally used
to access the external code or data space (e.g. MOVC A,@A+DPTR or MOVX A,@DPTR respectively).
Mnemonic: DPL
7
6
Address: 82h
0
Reset
00h
5
4
3
DPL [7:0]
2
1
DPL[7:0]: Data pointer Low
Mnemonic: DPH
7
6
Address: 83h
0
Reset
00h
5
4
3
DPH [7:0]
2
1
DPH [7:0]: Data pointer High
Specifications subject to change without notice contact your sales representatives for the most recent information.
ISSFD-M081
Ver A SM5964B 3/7/2014
- 23 -
SYNCMOS [ SYNCMOS TECHNOLOGIES,INC ]
