Freescale Semiconductor, Inc.
System Integration Module (SIM)
9.3.3 Clocks in Stop Mode and Wait Mode
Upon exit from stop mode by an interrupt, break, or reset, the SIM allows
CGMXCLK to clock the SIM counter. The CPU and peripheral clocks do
not become active until after the stop delay timeout. This timeout is
selectable as 4096 or 32 CGMXCLK cycles. See
In wait mode, the CPU clocks are inactive. Refer to the wait mode
subsection of each module to see if the module is active or inactive in
wait mode. Some modules can be programmed to be active in wait
mode.
Freescale Semiconductor, Inc...
9.4 Reset and System Initialization
The MCU has these reset sources:
•
•
•
•
•
•
Power-on reset module (POR)
External reset pin (RST)
Computer operating properly module (COP)
Low-voltage inhibit module (LVI)
Illegal opcode
Illegal address
All of these resets produce the vector $FFFE–FFFF ($FEFE–FEFF in
monitor mode) and assert the internal reset signal (IRST). IRST causes
all registers to be returned to their default values and all modules to be
returned to their reset states.
An internal reset clears the SIM counter (see
but an
external reset does not. Each of the resets sets a corresponding bit in
the SIM reset status register (SRSR). See
Technical Data
System Integration Module (SIM)
For More Information On This Product,
Go to: www.freescale.com
MC68HC908AS60 — Rev. 1.0
FREESCALE [ FREESCALE SEMICONDUCTOR, INC ]
