欢迎访问ic37.com |
会员登录 免费注册
发布采购

1553BRT-EBR 参数 Datasheet PDF下载

1553BRT-EBR图片预览
型号: 1553BRT-EBR
PDF下载: 下载PDF文件 查看货源
内容描述: Core1553BRT - EBR增强的比特率1553远程终端 [Core1553BRT-EBR Enhanced Bit Rate 1553 Remote Terminal]
分类和应用:
文件页数/大小: 28 页 / 204 K
品牌: ACTEL [ Actel Corporation ]
 浏览型号1553BRT-EBR的Datasheet PDF文件第4页浏览型号1553BRT-EBR的Datasheet PDF文件第5页浏览型号1553BRT-EBR的Datasheet PDF文件第6页浏览型号1553BRT-EBR的Datasheet PDF文件第7页浏览型号1553BRT-EBR的Datasheet PDF文件第9页浏览型号1553BRT-EBR的Datasheet PDF文件第10页浏览型号1553BRT-EBR的Datasheet PDF文件第11页浏览型号1553BRT-EBR的Datasheet PDF文件第12页  
Core1553BRT-EBR Enhanced Bit Rate 1553 Remote Terminal
Command Legalization Interface
The core checks the validity of all 1553EBR command
words. In RTL and netlist versions of the core, the logic
may be implemented externally to the core. The
command word is provided, and the logic must generate
the command valid input. The command legalization
interface also provides two strobes that are used to latch
the command value to enable it to be used for address
Table 4 •
Command Legalization Interface
Port Name
USEEXTOK
Type
In
mapping and interrupt vector extension functions
4).
Backend Interface
The backend interface supports both synchronous
operation (to the core clock) and asynchronous
operation to backend devices (Table
Description
When '0', the core uses its own internal command valid logic, enabling all legal supported
mode codes and all sub-addresses.
When '1', the core disables its internal logic and uses the external CMDOKAY input for
command legality.
CMDVAL[11:0]
Out
Active
11
10
[9:5]
[4:0]
Command
0: Non-broadcast
1: Broadcast
0: Receive
1: Transmit
Sub-address
Word count / mode code
These outputs are valid throughout the complete 1553EBR message. They can also be used to
steer data to particular backend devices. In particular, bit 11 allows non-broadcast and
broadcast messages to be differentiated.
CMDSTB
CMDOKAY
CMDOKOUT
ADDRLAT
Out
In
Out
Out
Single clock cycle pulse that indicates CMDVAL has changed
Command word is okay (active high). The external logic must set this within 2 µs from the
CMDVAL output changing.
Command word is okay output. When USEEXTOK = '0', the core outputs its internal
command word okay validation signal.
CMDVAL address latch enable output (active high) is used to latch the CMDVAL when it is
being used for an address mapping function. ADDRLAT should be connected to the enable of
a rising edge clock flip-flop.
CMDVAL interrupt vector latch enable output (active high) is used to latch the CMDVAL when
it is being used for an extended interrupt vector function. INTLAT should be connected to the
enable of a rising edge clock flip-flop.
INTLAT
Out
8
A d v a n c e d v 1 .1